DIY Patch Leather Sewing Machine Shoe Repair Boot Patcher Throat 11.8 Inch

DIY Patch Leather Sewing Machine Shoe Repair Boot Patcher Throat 11.8 Inch Patch Leather Industrial Sewing Machine Shoe Repair Boot Patcher Canvas Bags Pouches Single Needle Lockstitch Cylinder Hand Crank Diy Head Only Description This Leather Shoe Sewing Machine Supports Nylon Thread Cotton Thread and Silk Thread to Make up for the Shortcomings of Ordinary Shoe Mending Machines That Only Use Nylon Thread Making It More Widely Available. This High-quality High-efficiency and Excellent-performance Shoe Sewing Machine Is Your Wise Choice! Details Small Cylinder Diameter: the Small Diameter (＜1.81in) Makes It Can Be Easily Sewn Even at Special Small Angles. Fixed Needle: It Ensures a More Stable and Smooth Sewing Process. Plastic Spraying Treatment: Its Shell Is Sprayed with Plastic to Enhance Its Corrosion Resistance and Prolong Its Service Life. Application This Product Is Suitable for Sewing or Repairing Thick Materials (Leather Rubber Plastic Nylon Thread Polyester Cotton and Canvas) Such As Shoes Boots Slippers Bags Dolls Cylindrical Objects Raincoats Leather Bags Trousers and Canvas Tent. How to Use Install the Prepared Coil Onto the Head First. Pull out the Thread on the Coil and Wrap It Around the Coil Holder. Place the Product to Be Mended on the Front of the Sewing Machine. Shake the Handwheel to Start the Needle by Mechanical Transmission. Specification Model: Sm-2972 Needle: Dp*17 16# Color: White Material: Cast Iron Surface Treatment: Plastic Spraying Treatment Operation Mode: Manual Single Needle: Straight Stitch Max. Sewing Speed: 500spm Cylinder Diameter: ＜ 30mm/ 1.81in Stitch Length: 5mm/ 0.20in Arm Length: 30cm/ 11.81in Presser Lift Height: 10.5mm/ 0.41in Net Weight: 27kg/ 59.52lb Gross Weight: 30kg/ 66.14lb Product Size: 43*20*43cm/ 16.93*7.87*16.93in Packing Size: 59*28.5*49cm/ 23.23*11.22*19.29in Package Included 1* Leather Shoe Sewing Machine 1* English & Chinese User Manual All Needed Accessories Notes Please Note That This Product Does Not Include a Table Stand Motor. Please Pay Attention to Avoid Turning the Handwheel Upside down During Use to Prevent the Shuttle from Knocking Inside. Please Note That This Machine Is Lubricated Manually so You Need to Add Lubricating Oil Manually Before Each Use. Please Note That There Is a Groove on the Needle Which Must Face Left Otherwise the Thread Will Break. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3 Cm Error Due to Manual Measurement and Make Sure You Do Not Mind Before Ordering. Note: It Is Difficult to Sew the Too Hard and Thick Leather.(the Thickness of the Fabric Shall Not Exceed 4mm)