DFROBOT Development Insect Robot Hexa Robot Kit Support Wireless/bluetooth Control For Arduino/iOS

Descriptions: - The coordinated movement of 3 mini servos is used to move the environment, and the environment can be perceived by infrared ranging, and the brightness of the surrounding light can also be perceived. - The center of the product is a powerful Beetle controller and expansion board, and it is programmed with simple and easy to use Arduino. - It can advance, retreat, avoid obstacles, turn corners, patrol light and so on. - These functions make worms walk more complex and interact more richly. - The simple assembly allows you to understand the most basic principles of robotics and intelligent control. - Users who like DIY can also transform their interactive mode on the basis of the original code. Specifications: - Operating voltage: 5-6.4V (4 on the AAA battery) - Controller: Bluno Beetle (Bootloader: Arduino UNO) - bluetooth wireless programming and wireless access are added. - After assembly size: about 180x153X120mm - Weight: about 240g Documents: 1. Assembly Manual (Bluno Beetle Version) V2: please click here to reference. 2. Sample Code (Bluno Beetle Version): please click here to reference. Note: * The following necessary tools may be required to complete the assembly of the product: Screwdriver, needle nose pliers, scissors (not included in the product package) * Please allow 1-3CM differs due to manual measurement. Package Included: 1 x Insect robot Hexa Robot DIY Kit [ 1 x Master module (Bluno Beetle microcontroller + Bluno Beetle shield) 3 x 9g Micro Servo 1 x GP2Y0A21 distance sensor 1 x Sensor Bracket 2 x Two on AAA Battery Box 1 x Heat shrink tube-Black (diameter 6mm-100mm long) 3 x Steel wire 200mm x 1mm 1 x Servo connector 1 x White foam double sided glue (L / W / H: 78x61x3mm) 2 x Digital sensor line 3 x Cable tie (1.8x100mm) 1 x High quality micro USB data Line ]