DFROBOT 4WD Pirate Aluminum Alloy Mobile Platform DIY Kit for Arduino with 4Pcs TT Motor/User Manual

The product manual for your reference. Please click here to refer. Features: - The kit can not only be controlled by 51 controls, STC controllers, and AVR controllers, but also is suitable for use in Arduino controllers that are widely promoted in the world. - With a multi-purpose chassis, it can be used to fix the main control board, robot arm and sensor bracket. - At the same time, an extended platform is also placed on the chassis to allow users to expand and add detection sensors such as patrol line, ultrasonic and infrared sensors. - With 4 high-quality micro-speed motor - Complete chassis with mounting hardware - Chassis with antioxidant, wear-resistant spray paint, feel good. Specifications: Wheel diameter: about 65mm Trolley size: about 200 x 170 x 105mm (L*W*H) Chassis height from the ground: 13mm Load capacity up to: 800g Motor parameter Motor Model:130 Motor speed: 10,000 rpm Motor voltage: 4.5-6V Reduction ratio of gearbox: 1:120 Travel speed up to 48cm/s Motor no-load current: about 400mA Motor stall current: about 800mA Note: * This kit is provided in parts and needs to be assembled. * The product does not have a main board, users need to purchase separately, if need to realize the function such as bluetooth and ultrasonic sensor and automatic barrier. Package Included: 1 set Body structure 4x Wheels 4x Motor 1 x Power switch 1 x Charging interface 4x Copper column 3 x Infrared proximity switch mounting bracket 1 x Hunting sensor mounting plate 1 x 5 Section 5 Battery Boxes 1 set Fasteners (screws and nuts) Download the testing software, please click here.