DENEST 43CC 2-Stroke Earth Auger Digging Machine Gas Powered Hole Digger W/8 Drill Bit

Description Are You Still Laboriously Digging Holes Manually? Maybe You Can Try Our Two-stroke Gas-powered Digging Machine with an 8inch Drill Bit. the Machine Is Made of Sturdy and Hard Aluminum Steel and Plastic so It Is Very Durable. Moreover Equipped with a 43cc Gasoline Engine with a Max Rotational Speed of 8500rpm so It Works Very Efficiently. It Can Help You Quickly Dig Holes in the Ground. Details Throttle and Acceleration Switch: This Machine Has the Throttle Switch on One Handle. You Can Switch off the Engine or Accelerate the Operation by Pressing the Switch. It Ensures the Operation Is Easier and Safer. Fuel Tank: This Machine Has a Fuel Tank on the Engine to Facilitate You to Easily Track the Proper Fuel Level. Oil Bubble: There Is an Oil Bubble to Check Whether the Oil Has Been Supplied or Not. Press the Oil Bubble a Few Times Before Starting and See That There Is Oil in and out of the Oil Pipe Which Proves That the Oil Has Been Supplied. Removable Drill Bit: the Drill Bit Is a Removable Design Which Is Easy for You to Store and Replace. Application This Machine Can Be Used for Planting and Drilling Fence Piling Greenhouse Piling Afforestation Optical Cable Poles Tree Fertilizing Holes Etc. It Is Suitable for Use on Farms Parks Gardens Yards Fields Etc. Specification Color: Red and Black Material: Aluminum + Steel + Pp Engine: 2-Stroke Cylinder Capacity: 43cc Fuel Mix: 25:1 Power: 1.25kw Feature: Easy Starting System (Cord Starter) Rotational Speed: 6500-8500rpm Horsepower: 1.7hp Product Height: 1.1m/3.6ft Drill Bit Length: 80cm/31.49inch Drill Bit Size: 8in Assembled Size of Engine and Handle: 60*34*34cm/23.62*13.38*13.38inch Machine Package Size: 42*31*31cm/16.5*12.2*12.2inch Machine Gross Weight: 10.5kg/23.1lbs Machine Net Weight: 8.3kg/18.3lbs Drill Bit Package Size: 80*20*20cm/31.5*7.9*7.9inch Drill Bit Gross Weight: 3kg/6.6lbs Drill Bit Net Weight: 2.85kg/6.3lbs Package Included 1* Engine 2* Handles 1* 8inch Drill Bit 1* Fuel Bottle 1* English Instructions Other Accessories for Installation Notes You Should Fill the Fuel Tank with Mixed Oil (Gasoline: Two-stroke Engine Oil=25:1). Press the Oil Bubble a Few Times Before Starting. If the Oil Pipe Has Oil in and out It Suggests That the Oil Has Been Supplied. Pull the Starter Quickly When Starting Don t Stop Midway When Pulling. Please Start the Machine Before the Throttle Switch Opens. When Cold Starting the Machine Close the Damper First Then Reopen It so That It Can Run Normally. Please Note That It Can Only Be Used for Dirt Work and Not for Rock Stone or Metal or Gravel Surfaces. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3 Cm Error Due to Manual Measurement and Make Sure You Do Not Mind Before Ordering.