DC 6V Waterproof Cloning Garage Door Wireless Remote Control

Description: High copy accuracy and high copy efficiency. The error of copying data code and copying oscillation resistance is small and the copy cannot be dropped. The copy oscillation resistance range is wide from 1.2M to 6.2M. The circuit design is stable the keys are no longer used as power leads and high-current triodes are individually controlled to improve dynamics. to improve work efficiency. Multi-functional and changeable and user-friendly design is simple and use. high-frequency triodes launch power 13dbm. Less dead corners. Common chip can be copied: PT2264 PT2262 PT2260 PT2240 SC2262 SC2260 EV1527 SCT527 HS1527 HS2240 SCL1527 FP1527 etc. the same general suffix. This remote controller is suitable for distribution to customers with electric door remote control retractable door remote control garage door remote control motor control remote control curtain control remote control car and motorcycle remote control. Specification: Operating voltage: DC6V Operating current: 11mA Working frequency: 433MHZ Remote control distance: 50- (empty environment) Code mode: Working environment: -15~75 degrees Celsius Material: PC Product detailed size: 57 x 32 x 12mm/ 2.24 x 1.26 x 0.47inch Copy function description Data clearing: Press the top two buttons simultaneously indicator flashes 3 times then release the right hand (do not release the left hand) continuous use the right hand to press the right button three times in a row see the lights flashing continuously function is indicating Clear to . : After clearing you can the latest usage the following operations before copying the new data. At the same time press the lower two buttons of the remote control wait for three seconds to see indicator flashing and recovering data. The function is indicating that all key data are function: With the copy machine you can copy the remote control with a key suitable for mass production of the same coded remote control. With the copy machine one be used to reproduce different coded remote controllers of the same manufacturer which is suitable for mass production of different coded remote controllers. After code is place the remote controller that needs to be copied on the and put it Press the button that needs to be copied and the the remote controller at the same time. After the indicator lamp flashes five times then Chang Liang proves that the copy was successful. Package Includes: 1 Piece Note: Copy remote control and copy remote control can not be separated by a long distance. A long distance between them will result in incomplete data copying and a large error in the copy oscillation resistance. The copy remote controller should be as close as possible to the copied remote controller when copying. Although this copy remote controller very strength reception this is to infinitely reduce the error of the copy data error and the oscillation resistance. Improve copy accuracy. Do not put the remote control on a copy with a metal surface. This will reduce copy distance and copy accuracy. Do not try to copy with low battery power. Will affect the accuracy of the copy to a certain extent. When copying try not it in your hand. It should be placed close to the table to operate. Do not open the remote controller at will not store or use the remote controller in a high-temperature high-pressure high-humidity environment. When replacing the battery install the battery polarity correctly.