DC 3.7V-12V Mini Wireless Remote Control Switch Relay Micro Receiver Transmitter System For LED Light Smart Home

Specifications: Working Voltage: DC3.7V-DC12V Max Load: 1A (have better Load less than 700ma) Quiescent Current: 5ma Relay Working Current: 20-30ma Size: 25x11x8mm Working Mode: Momentary Toggle Latched adjustable Encoding Type: Learning Dot to add Transmitter Power Type: Can work with DC Power / Rechargeable lithium battery / Rechargeable How to change working mode : Normally Open Port (NO) Common Port (COM) Normally Close Port (NC) Momentary : Connect the right side 2 points (M) Latched : Connect the left side 2 points (L) Toggle : Let Point L and Point M in non-occupation Momentary------------press one button is working /ON. loosen your finger on the same button is stop/OFF Toggle---------------press one button for one time is working/ON .press the same button again is stop/OFF . Latched------------------press one button is working/ON ,press another button is stop/OFF . Learning Code : Latched: Input 3.5V-12V for the Receiver Connect the Learning Dot, The receiver Led indicator ON. Press remote button A 1 time, Led indicator flash for 3 times Then Press remote button B 1 time Led indicator flash for 3 times again it mean learning successfully. Momentary / Toggle : Input 3.5V-12V for the Receiver Connect the Learning Dot, The receiver Led indicator ON. Press remote button A 1 time, Led indicator flash for 3 times Then Press remote button A 1 time again Led indicator flash for 3 times again it mean learning successfully. Clearing Code: Connect the Learning Dot 5 seconds . Until the receiver Led indicator From ON to OFF, it mean Clearing Code Pair the remote control method: 1. Key remote control operation (self-locking/jog): Touch the pair of double contacts (tweezer) with a metal object at the same time, the code indicator light is illuminated, press the remote control 1 button, the controller indicator will flash. Once, it means that the code of the remote control 1 button has been copied in, the indicator light will go out, indicating that it has been saved. Then you can use this remote control to complete the remote control operation. 2. Key remote control operation (interlock): When the metal object touches the double contact (tweezer) at the same time, the code indicator light is illuminated. At this time, press the remote control A button, the controller indicator will flash once, indicating The code of the remote control A button has been copied in, and then press the remote control B button, the controller indicator will flash again, indicating that the code of the remote control B button has been copied in, the indicator will be off, indicating that it has been saved. Then you can use this remote control to complete the remote control operation. Package Include: 1 x Receiver 1 x Transmitter