DC 12V Mini RGB RF Remote USB 24 Key Wireless LED Controller For RGB LED Strip Light Remote Controller Dimmer

Specification Model KTRGB 17KRated Voltage DC 12VControl Range 20mConnection Wireless remote control RFControl Mode Remote ControlApplication LED StripInterface Type 4PINSignal RF 433Weight 25gFeatures The remote is powered by a standard 3 0V coin cell battery with a quiescent current of less than 1uA it can be stored for over 2 years of normal use daily 10 clicks life of more than 6 months The remote control adopts a crystal scheme with temperature and voltage compensation making it possible in different operating environments within the power supply range of the remote control Ensure effective communication distance up to 20 meters or even more The receiving end can support 5V 12V function which can be freely matched according to the LED light bar The monochrome payload is up to 1A current which is sufficient for most LED strips and ensures sufficient LED length The receiver terminal uses a high quality chip crystal oscillator which can still perform well under high load when the temperature of the board rises The entire receiver board consumes as little as 7mA when powered by 12V Note This LED controller can only be used in DC 12V RGB LED Strip Lighs can not be used in AC 220V LED Strip lights During installation the light bar is connected to the controller which is connected to a 12V power supply transformer can be The effective power of the switch power supply is only 80 of the power mark so the user selects the