DC 12V 24V Two-way Remote Control Switch 10A Relay/Access Control Gate Jog Self-locking Control Board

Application scenarios Car motorcycle electric vehicle modification LED lamp yard light control electric door remote modification access control electric curtain and other motor forward and reverse control and other intelligent control and security alarm fields Learning and clearing methods and steps 1 Button function The two buttons on the controller are the learning button LEARNING and the mode switch button MODEL 2 Learning method Press the learning button once the indicator light flashes into the learning state press any button on the remote control the indicator light flashes three times quickly indicating that the No 1 relay has learned successfully press the learning button twice repeat the above steps and learn the No 2 relay 3 Working mode switching when all relays are off the power can be disconnected and then re powered during operation Jog Press the mode switch button once the indicator light flashes once and then goes out to indicate that the jog setting is successful Interlock Press the mode switch button twice the indicator light flashes twice and then goes out to indicate that the interlock setting is successful Self locking Press the mode switch button three times the indicator light flashes three times and then goes out to indicate that the self locking setting is successful Delay 5 seconds Press the mode switch button four times the indicator light flashes four times and then goes out to indicate that the delay setting is s