DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch With 2 Transmitters

Features: Easy to install and easy to carry With a slidable cover on the remote control With a hook on the remote control Use Learning coding, stable and reliable The wireless signal can pass through walls, floors and doors You can turn on or turn off the receiver with transmitter (remote control) from any place within a reliable distance Operating Voltage: DC12V Maximum Load: 10A Operating Frequency: 433MHZ (in set) Receiver Sensitivity: -100dBm Encoding Type: learning code Board Size: Approx. 5.3x3.1cm/ 2.09x1.22" There are three kinds of jog, self-locking and interlocking in the output mode. (switch by the jumper cap) output method: 1. Signal self-locking - Jump cap is inserted in 1-2 position---Function literal translation: that is, press and hold the remote control button to work, release to stop. Or press and hold to stop, release to work, depending on the wiring situation. 2. Signal interlock - Jump cap inserted in 2-3 position --- Function literal translation: that is, the function is completed on one key, press the remote control button in turn, the first one is open, the second is off, the third is open, the four times for off and cycle. 3. Signal jog - Pin 1-2-3 left empty - Function literal translation: Press the remote control A button to open, B button to off or A button to off, B button to open, depending on the learning situation. Remote control code learning method: There is an S1 tact switch on the control board. This button is used to learn the code and clear code. For the first time, please use the code first. Clear code pair code normal use 1: Clear code: After power-on, press the learning button on the receiver until the indicator light is turned from on to off and then on. At this time, the clear code is successful. 2: Pair code: After power-on, press the learning button of the receiving board until the indicator light is off, then release the button and then press the button of the remote controller to learn. After the receiving board indicator flashes 5 times, it will be off. means pair success. Package Included: 1 x Learning Code Receiver 2 x Remote Control