Cylinder Ice Cube Mold Ice Cup Ice Maker Ice Storage Box Ice Tray Cylinder Ice Cube Mold Ice Cup

Cylinder Ice Cube Mold Ice Cup Ice Maker Ice Storage Box Ice Tray Cylinder Ice Cube Mold Ice Cup Features: Steps 1. Pull out the plastic inner cylinder and pour water into the silicone container slightly more than 2 grids not more than 2 and a half grids. Steps 2. Slowly insert the inner cylinder with the cover into the silicone cavity pays attention to rotate it to the bottom and hold it down and then gently pinch the silicone side under the cover to vent the inner cylinder to the inner cylinder from floating. Steps 3. Put the molds at room temperature for a few minutes; if you don’t want to wait and press hard you can pour a proper amount of hot water into the inner cylinder pour out the hot water for about 10 seconds and then easily pull out the inner cylinder) Steps 4. Press the outer wall of the silicone to continuously adjust the angle to remove the ice cubes Just the right size of 1.3cm ice cubes - suitable for cool drinks quickly but also guarantees about 10 minutes of ice time too large ice cubes cool down drinks slowly too broken smoothies will melt in one or two minutes. not durable enough Easy to take ice - press the ice cylinder lightly—the ice cubes fall off and easy to use Simplely water injection - pour half of the water directly into the cup and the water injection is completed in 3 seconds saving time. Easy to use - the sealing is stable and not easy to leak. Space saving - small and round shape easy to place. No need for additional storage - after pressing the ice cubes you can pour it directly into the water glass and enjoy it easily Just the right size of 1.3cm ice cubes - suita Product Description: Color： Multicolor Material ：plastic Size：as the picture shows