Charge Discharge Integrated Module Good Performance Charge Discharge Module For Home For Engineer

Charge Discharge Integrated Module Good Performance Charge Discharge Module for Home for Engineer Specification: Item Type: Charge Discharge ModuleCharging Voltage: DC 4.5V-5.5V (DC 5V recommended) Charging Current: 0-2.1A Charging Quiescent Current: 100uA Full Voltage: 4.2V?1% Discharge Current: 0-3.5A Discharge Quiescent Current: 50uA Discharge Efficiency: 96% Output Voltage: 5V Output Current: 0-2.1A; Ambient Temperature: -20 degrees Celsius to +85 degrees Celsius Pin Description: 1 VIN: Charge port positive input+ 2 GND: Charge port negative input- 3 BAT: Lithium battery+ 4 GND: Lithium battery- 5 GND: Output port negative output- 6 VOUT: Output port positive output+ 7 KEY: Output enable trigger port (low pulse trigger) Note: 1. In the discharging mode (the KEY function of the charging mode is invalid) trigger the KEY port once to turn on the output; trigger the KEY port 2 times to turn off the output. 2. When the load is connected the output will be turned on automatically. If the load is less than 50MA the output will be turned off after 30 seconds; if the load is greater than 50MA the output will be turned on continuously. 3. Allow charging and discharging at the same time (Note: At this time the output voltage is less than 5V. Stop charging and discharging will also stop. It will be output only after reactivation.) Package List: 1 x Charge Discharge Module