CUAV V5 NANO Flight Controller GPS for PX4 PIX FPV Drone Multi-rotors VTOL UAV Fixed Wing

Specifications: Hardware Parameters: - Main FMU Processor: STM32F765(32-bit, 216MHz, 2MB flash, 512KB RAM) Features: - Compact but powerful V5 nano flight controller + NEO GPS - Support for hardware on open source platform PX4 and Autopilot - Suitable for fixed-wing drones, helicopters, multicopters, FPVs, VTOL, Unmanned Boats, UAVs - High Performance: Equipped with STM32F765 microprocessor, features 216MHz main frequency, 2M flash and 512K SDRAM. There are four groups of isolation chips and a MS5611 high-precision air gauge. - Easy to install and dismantle with 2.6mm spacing between IO pins. - Real-time Data Monitor: Five groups of built-in sensors enhance its safety and stable performance. There are ICM-20689 accelerometer and gyroscope, ICM-20602 accelerometer and gyroscope, BMI055 accelerometer and gyroscope, IST8310 magnetic compass and MS5611 air gauge. Sensors: - Accelerometer: ICM-20602/ICM-20689/BMI055 - Gyroscope: ICM-20602/ICM-20689/BMI055 - Magnetometer: IST8310 - Air Gauge: MS5611 Interfaces: - UART Ports: 5 - I2C Ports: 4 - PWM Output: Up to 11 - PWM Input: 4 - Signal Input Protocol for Remote Control: PPM/SBUS/DSM - RC IN: 1 - PPM IN:1 - RSSI Input: PWM or 3.3V analog voltage - CAN Standard Bus: 2 - Current & Voltage Input: 1 - Safety Switch: 1 - GPS Port: 1 - Debug Port: 1 - JATG Port: 1 - USB Port: 1 (Type-C) Supported Models: - For PX4 Hardware: Fixed-wing Aircrafts, 3-8 Multicopters, Helicopters, VTOL, UAVs, Unmanned Boats Working Conditions & Physical Parameters: - PM Working Voltage: 4.5 to 5.5V - USB Voltage: 5V0.25V - Servo Input: 0 to 36V - Working Temperature: -40 to 85 Weight & Dimensions: - Dimensions: 40 x 60 x 17.5mm - Weight: 40g Package Included: - 1 x V5 nano Flight Controller - 2 x Dupont Cables - 1 x ADC6.6 Cable - 2 x I2C/CAN Cables - 1 x SBUS Signal Cable - 1 x RSSI Cable - 1 x DSM Signal Cable - 1 x ADC3.3 Cable - 1 x Debug Cable - 1 x Safety Switch + Cable - 1 x Voltage Current Cable - 1 x PW-Link Module + Cable - 1 x Power Suppl Module - 1 x 16GB Memory Card - 1 x I2C Expansion Board - 1 x TTL Board