CRL PH20ABR Brass Top Door Patch Fitting with 1NT303 Insert

CRL Top Gate Patch Fittings are used with all three of our gate and door pivots. It fits in the upper corner of the gate s glass panel and requires a hole and cut-out in the glass. Available in brushed stainless steel finish it comes complete with instructions and a glass cut-out template. The following guidelines are to be used when making a door using this hardware: Maximum Height: 102 (2.59 m) Maximum Weight: 194 lbs. (88 kg) Maximum Width: 42 (1.07 m) If the door exceeds any of these limitations full door rails should be used. GLASS FABRICATION REQUIRED: One 3/4 (19 mm) Diameter Hole and Corner Notch COMES WITH: Template and Instructions Do Not Use With: PH42L PH42R PH43L or PH43R Transom Patch Fittings. They Require European Door Patch Fitting PH21A Important Notes: These fittings are not for use with Laminated Glass. The following guidelines are to be used when making a 1/2 glass door using this hardware: Maximum Height: 102 (2.59 m) Maximum Height: 176 Lbs. (80 kg) Maximum Width: 42 (1.09 m) If the door exceeds any of these limitations full door rails should be used.