CORONA R4DM 2.4GHz 4CH DMSS Compatible Receiver for JR XG6 XG7 XG8 XG11 XG14 Radio Transmitter

CORONA R4DM 2 4GHz 4CH DMSS Compatible Receiver for JR XG6 XG7 XG8 XG11 XG14 Radio TransmitterCompatibility CORONA 2 4GHz DMSS Compatible Receiver is designed to use with JR DMSS 2 4GHz transmitters such as XG6 XG7 XG8 XG11 and XG14 under DMSS protocol mode Feature 1 4ch servo channels under normal status 2 S BUS output support expanding servo channels on the 4th channel under special status 3 13mS latency under linked with XG7 and 14mS latency under linked with other transmitters Specifications Brand CoronaModel R4DMChannels 4Voltage Range 3 6 8 5VOperating Current 60mA max and 35mA under linkedOperation temperature 10 70 degCLatency 13mS or 14mSSensitivity about 100dBm Weight 11g Bind procedure Turn on the DMSS transmitter leave it 0 5M 1M away the receiver Connect a shorter on CH2 signal and GND when bind with XG7 and connect a shorter on CH3 when bind with other transmitters Connect the battery to the receiver while pressing down receiver s button Red LED light on and Green LED off when searching signals and turn to Green LED light on and Red LED off indicate bind is succeeded Fail safe setting R4DM set failsafe on the DMSS transmitter just like the operation of the JR s DMSS receivers We highly recommend you set failsafe feature while flying your models An example of a useful Failsafe setting would be to shut down the model s throttle so that it does not fly or drive away uncontrolled Special Normal mode switch guide If your receiver has