Bright Tangerine Base Kit w/LeftField QR Baseplate,Top Plate for Sony FX6 Camera

Mount your Sony FX6 with the LeftField system to set your camera on a 15mm LWS platform with a rigid top surface for mounting accessories.Set up your Sony FX6 with the LeftField System speed up transitions on set. Using the patented Open UP quick-release, you can simply lift off your camera from any ARRI standard dovetail.Versatile RiggingThe Top Plate lets you easily mount accessories, with options for NATO, 1/4", 3/8" & Sony 8T points. There are also two Quick Detach (QD) sockets to attach camera straps & swivels. Each Base kit comes with the Top Plate & LeftField 15mm LWS BaseplateNo CompromisesMachined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability.- Sony FX6 LeftField QR Baseplate -Set your Sony FX6 at the correct height for 15mm LWS, speeding up transitions with the Open UP quick-release that lets you lift off the camera from the dovetail. To support accessories, add a set of 15mm rods.This Baseplate Kit comes with the LeftField 15mm Baseplate, LeftField Dovetail Plate & Sony FX6 Riser.The Sony FX6 LeftField Quick Release Baseplate sets the camera to the correct height for 15mm LWS. It provides 15mm rod support for accessories and allows for faster transitions between setups using the patented Open UP quick-release.Snap On, Snap OffThe Open UP quick-release features a three-stage design which lets you securely locks the baseplate in place, slide for balance & lift off vertically. This is particularly useful for large camera builds where sliding the camera from the dovetail can be difficult.ARRI Dovetail CompatibleThe baseplate automatically calibrates to any ARRI standard dovetail, even those that our out of tolerance and is also compatible with the LeftField Dovetail Plate for smaller setups.Interchangeable RisersA wide range of risers are available to suit different cameras. If you own, rent or work with multiple cameras, simply swap the risers without buying a new baseplate each time.No CompromisesMachined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability.- Sony FX6 Top Plate -Attach the Top Plate to the Sony FX6 to provide a secure mounting point for accessories. By attaching accessories to the top plate, less weight can be placed onto the top handle while also adding quick-release functionality with the integrated NATO rails.This Top Plate attaches to the top of the Sony FX6, wrapping around the top handle providing secure mounting points for a wide range of accessories. Integrated NATO rails run the length of the plate, with spring-loaded safety releases on both ends.Helicoil, NATO 8T And QDWhen it comes to rigging, you can choose from threaded, NATO and QD points, or any combination you need. All threaded points are stainless-steel helicoiled for added strength. Helicoil fittings are crucial to prevent thread stripping or binding. An important factor to consider when constantly changing rig configurations. There are also two Sony 8T points at the rear of the plate.Combines With:The Top Plate can also be used with B4004.1006 Filler piece to add a third NATO rail in the middle which provides a centered mounting point. Useful for gimbal builds & other setups where the FX6 handle is not required.No CompromisesMachined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability.