Bretford 36" Circle Cafe Table with Power Dome Cutout

Simple, clean and collaborative. The EXPLORE meeting and caf½ tables support both formal and informal collaboration. Available in round; square; rectangle; race track and oval shapes. Tables come in standing and sitting heights and can accommodate power dome electrical powering and charging options. • Accommodating: Tables come in a variety of shapes and heights • Power Ready: Bretford optional Juice Power and Power Dome systems enables power and charging of today's technologies • Options: Tables come in a variety of sizes, laminate finishes and edge choices. • Carbon Neutral certified product • EXPLORE Pedestal Base Caf½ Table has achieved GREENGUARD GOLD Certification Base Circle- and square-shaped caf½ tables feature a 1/4" flat round steel base that stands on five 1" non-marring, hard-plastic glides with 1/4" leveling adjustment. Rectangle, race track and oval shaped tables feature two 1/4" flat round steel bases that each stand on five 1" non-marring, hard-plastic glides with 1/4" leveling adjustment. Leg 16-gauge 5"D round steel tube leg attaches to flat round steel base. Two laser cutout hooks are placed at 23 7/8" high on sitting height tables and 34 3/8" high on standing height tables. The hooks on each side of the leg designed to hang backpacks, handbags and coats. Tables with Juice Power feature one leg with a hook and one leg with a cut out to enable cords to pass from a central cord bin into the leg and down to the floor. Leg is attached to work surface with 2 threaded steel rods for stability. Work Surface All laminate work surfaces feature a 1" thick 45 lb density high-pressure laminate (HPL) backer. Tables powered with the Power Dome feature one or two cut outs above the pedestal base. Number of cut outs is dependent upon table size and configuration. Tables powered by the Juice Power System include a center cut out to support a Stand Alone unit. Each table includes a Juice power module, specify power version at the time of order. Work Surface Edge Detail Tables with edge detail 01 have a 3 mm thermoplastic elastomer (TPE) t-mold edge band, which runs the entire perimeter of the work surface. Tables with edge detail 08 are a sealed MDF with rounded edge and cut away at a reverse 22.5 deg. angle. Tables with edge detail 18 are an injection formed polyurethane (PU) bumper with a 45 deg. angle reverse cut away. Finish Options Tables can be ordered in any standard, laminate, trim and powder paint offered by Bretford. Construction And Environmental Testing Using in-house or third party verification, many Bretford products are tested to meet or exceed the appropriate ANSI/BIFMA standards for durability and safety. TPE, PP and PU are non-toxic, additive and phthalate free and recyclable at the end of the product life cycle. In landfill conditions TPE will break down, releasing only water and biodegradable components. PP and PU will remain inert in landfill conditions. All edge options are environmentally preferred to polyvinyl chloride (PVC). PVC is constructed with chlorine and when burned omits toxic byproducts such as dioxins, chlorocarbons and hydrochloric acid. Additionally PVC is constructed using a significant amount of lead, which is highly toxic during the product life cycle and after disposal. Recycled Content Tables are constructed with a steel base that is comprised of a minimal 25% to 35% postconsumer recycled material. All steel components are completely recyclable at the end of the product life cycle. Work surfaces with HPL have an MDF substrate constructed with an average of 70% recycled content.