Bosch LTC 8570/60 Biphase Code Merger Unit with 4 Inputs and 32 Outputs, 120 VAC

The LTC 8569, LTC 8570, LTC 8571, and LTC 8572 Series are control code merger and line driver units used to combine biphase control code from multiple systems. Models are available having either 2 or 4 inputs, and 32 or 64 outputs. These units will accept signal inputs from any device capable of generating biphase control code. This includes the following:• Allegiant main CPU bays• LTC 8568/00 Signal Distribution units• An output from another Code Merger unit• Digital Recorders, such as Divar Series, DESA Series, & System4 Server Series• Code Converters or Code Translators• LTC 5136 AutoDome Controllers• System4 Series Multiplexers• LTC 8780, LTC 8784, and LTC 8786 Series Data Converter units.Two 2-meter (6 ft) data cables, for interface to Allegiant main CPU bays, are supplied with the 2-channel versions; four cables are supplied with the 4-channel versions. These units can provide data to any device capable of accepting biphase control code, including the following: • Allegiant Satellite systems• AutoDome Series cameras• Conventional Allegiant Receiver/Driver Series• Allegiant LTC 8770 Relay Follower SeriesControl code wiring to the remote devices can be connected to the outputs of the code mergers using either star or daisy chain wiring configurations. Each output is capable of driving up to eight (8) remote devices using a daisy chain wiring configuration. Multiple units may be cascaded to obtain additional biphase code outputs.The Code Merger units also provide an address offset functionality. This feature is convenient when it is necessary to convert camera address numbers, encoded within the biphase data, to a higher value. Offset increments of 16, 32, or 48 can be enabled via an internal dip switch selection.