[Big Save!]Rechargeable Moon Lamp LED 3d Print Moon Light with Stand & Remote & Touch Control and USB Rechargeable Moon Light Lamps Night Lights for Kids Kids Lover Birthday Party

Description: Material:PVC Size: 12cm packaging size: 14(L) *14(W) *15(H)cm/5.5*5.5*5.9inch Single net weight / gross weight: 169g/330g 15cm product packaging ruler: 16(L) *16(W) *17(H)cm/6.2*5.5*6.6inch Single net weight / gross weight: 285g/500g Color: Touch switch: White / yellow Sound control switch: warm white / White / yellow Remote control switch: 16 color Occasion:Home Decor Voltage:DC3.7V Lighting Time:about 8h Charging Time:2 hours Battery capacity: Touch switch300mAh;Sound control switch/Remote control switch500mAh Package List: Touch/Sound control switch: 1 x Moonlight Lamp 1 x USB Cable (No Adapter) 1 x Wood Mount: 1 x Manual Remote control switch 1 x Moonlight Lamp 1 x USB Cable (No Adapter) 1 x Wood Mount: 1 x Manual 1 x Telecontroller Feature: 1. This lamp is made by innovative 3D printing technology adopting non-toxic odorless food grade PLA material. Layer by layer stack restore the real appearance of the moon. 2. The moon-like lamp has raters and pockmarks along the surface to mimic the moon s surface will emits a soft white glow that really does look like moonlight. 3. Color Changing: Slightly touch the button to change the color white or yellow (brightness can be adjusted under the lights on state). 4. You can place it anywhere you like and then it will light the area around it up with a soft white light. A perfect addition to your child s bedroom night table or in home office desk. 5. Comes with wooden mount a perfect gift for girls and boys your loved one or girlfriend. With low voltage USB charging it s especially Safe for Kids. Usage method 1. Touch the metal ring at the bottom of the moon lamp to switch on / change the light and change color from white to yellow. 2. Long press the metal ring to adjust the brightness and it has the brightness memory function. 3. If your hand is too dry or the temperature is too low the light can not respond. 4. The white light will not shine when power low. 5. Insert the DC connector into the metal ring at the bottom of the moon lamp to charge the red light always on during charging. 6. Turn off the red light automatically when fully charged. Matters needing attention 1 when charging the ball becomes red full and then extinguished. 2 because the installation of the circuit required the sphere edge will have seam. 3 3D printing causes the object surface to have the contour line phenomenon.