Bicycle Light USB Charging Outdoor LED Riding Lamp Set, Style: Tail Light

Front Light Features:1. Strong battery life, bright LED lamp beads, aluminum alloy material, waterproof, memory mode, anti-glare light2. The large wide-angle floodlight design greatly widens the lighting angle, and there is no dead angle in the front wheel area. You can see clearly from riding corners to street corners3. Anti-glare design, aluminum alloy cover design, prevent light reflection from irritating rider eyes4. The shell is made of aluminum alloy, which is strong and resistant to falling, high and low temperature, and can be used normally even if it is exposed to the sun for a long time5. Five-level lighting, one-button switching, high-efficiency circuit, long-lasting battery lifeTail Light Features:1. 16 SMD red LEDs, warning lighting at night2. 180-degree wide-angle irradiation surface, 4 red warning lights on the left and right sides, allowing the light source to emit from both sides of the housing, realizing a 180-degree wide-range warning, reminding you to avoid vehicles coming from the side3. 6 levels of lighting, one-button switching, to meet the needs of different riding scenes4. IPX6 protection, not afraid of wind and rain, completely prevent dust and mud from entering, effectively resist heavy rain or strong water splashing, and still work normally5. Easy to install and remove, the silicone can stretch 95-160mm in length, and only one silicone strap can fix the bicycle lightParameter1. Bulb type: Front light: 2 x XPG2 lamp beads; Tail light: 16 SMD red LEDs2. Irradiation distance: 100-200 meters3. Lumens: 300 lumens4. Charge and discharge protection: built-in overcharge and overdischarge IC to prolong battery life5. Charging interface type: TYPE-C/USB-C USB charging port6. Charging indication: the red indicator light flashes slowly when charging; the red indicator light is always on when fully charged7. Front light mode: high-medium-low-SOS-warning flash8. Tail light mode: high-medium-low-slow flash-fast flash-marquee9. Switch: Click to open, click the gear cycle, press and hold for 2 seconds to shut down, and turn off the mode after turning on the memory10. Charging voltage: 5V/1A11. Barrel material: aluminum alloy (wear-resistant anodized)12. Charging time: 2-3 hours13. Battery life: 2.5-15 hours for front lights; 5-42 hours for tail lights14. Power supply mode: front light: built-in 500-capacity polymer battery, tail light: built-in 500-capacity polymer battery15. Switch type: lamp head push switch16. Waterproof grade: IPX617. Packing list: host + USB cable + silicone strap + manual + packing box18. Size: 4.3 x 2.4 x 2.8cm19. Net weight: 36g