Battery Active Equalizer 0.01mA Static Operating Current High Accuracy Light Indicator 1.2A Durable Batteries Balance Board With Cable For LiFePO4 2s

Battery Active Equalizer 0.01mA Static Operating Current High Accuracy Light Indicator 1.2A Durable Batteries Balance Board with Cable for LiFePO4 2s Specification: Item Type: Battery Active Equalizer Applicable Battery: Li ion NCM LFP. Single Cell Voltage: 3.0-4.2V Recommended Battery Capacity: Below 30AH Voltage Balance Accuracy: 30mV between adjacent voltages typical. Equalization Method: It is detected that the voltage difference between adjacent batteries is greater than 0.1V to trigger the equalization and the voltage difference between adjacent batteries is less than 0.03V to stop working. Balance Current: 0.1V voltage difference and 0.5A balance current when the voltage difference is above 0.2V the maximum balance current is 1.2A. Under voltage protection sleep voltage: The adjacent voltage difference is less than 0.03V and enter the sleep state. Quiescent Operating Current: 0.01mA Package List: 1 x Battery Active Equalizer 1 x Cable Note: 1. It is not recommended to be compatible with low strings the indicator light will flash and report an error. Be sure to check that each cell is properly wired and insulated before connecting the balancing board. Otherwise it will short circuit and burn the board. 2. If the battery is connected it must be used with the BMS protection board. The charge and discharge voltage difference triggers the balance board to work to achieve energy transfer balance.