Battery Active Balancer Board Battery Active Equalizer Easy To Use Plastic 1.3A For Ternary Lithium Batteries For Iron Lithium Batteries 3S

Battery Active Balancer Board Battery Active Equalizer Easy To Use Plastic 1.3A for Ternary Lithium Batteries for Iron Lithium Batteries 3S Specification: Item Type: Battery Active Balancer Board Product Material: Plastic Model: None Indicator Light: With Working Indicator Scope of Application: Ternary Lithium Battery General Lithium Iron Battery Product Size: Approx. 22 x 16 x 4mm / 0.9 x 0.6 x 0.16in (2 Strings) 22 x 30.5 x 4mm / 0.9 x 1.2 x 0.16in (3 Strings) 22 x 45 x 4mm / 0.9 x 1.8 x 0.16in (4 Strings) Operating Voltage Range: 3.0V-4.5V Balance Start Condition: the Voltage Difference Between Two Adjacent Batteries is Greater Than 0.1V Balance Current: 1.3A (Balance Current is Related to Voltage Difference the Smaller the Voltage Difference the Smaller the Balance Current) Package List: 1 x Inductance Active Balance Board Note: 1: Start wiring from 0V in order. 0V is the total negative pole of the battery pack. Don t connect the wrong wire otherwise the chip will be burnt out. 2: Use copper wire of 0.5 mm? (18AWG) or more for connection. The thicker the cable the better and the shorter the better. 3: The flashing indicator light indicates that the equalization start failed. Please check whether the connection wire is welded well. If the welding wire is welded correctly and the indicator light is still flashing it means that the internal resistance of the battery is too large. Start failure please reduce the equalization current to use (remove all R1 resistors and R2 resistors on the circuit board and interchange the equalization current is reduced to 0.5A).