Bakeey T4 Smart Fingerprint Drawer Lock Android Micro Charging Intelligent Lock

Instructions 1 Enter fingerprint operation Press any finger for 5 seconds wait for the blue light to flash then release the finger the blue light is always on indicating that fingerprints can be started Press the fingerprint to be recorded on the surface of the fingerprint recognition head A green light flashes once to indicate that the entry was successful Remove your finger and press it again 5 times If the red light appears during the entry press it once more After five successful entries the green light always lights for one second to indicate the completion of the entry To enter other fingerprints you need to verify the administrator and the entry is in progress The first three fingerprints entered are the administrator 2 Unlock operation Press with the fingerprint that has been successfully entered Flashing green light indicates that the fingerprint recognition is correct and the lock is unlocked If you press your finger the red flashing means that the fingerprint recognition fails you need to press the fingerprint again 3 Lock operation In the unlocked state use the fingerprint that has been successfully registered to press for 2 seconds When the green light turns solid blue it means the fingerprint recognition is correct and the lock is closed If you press your finger red flashing means that the fingerprint recognition fails you need to press the fingerprint again 4 Delete fingerprint operation Hold down your finger for 10 seconds