Baader Planetarium 2" Mark III Coma Corrector with 1.25" Eyepiece Holder

The Multi Purpose Coma Corrector Mark III eliminates coma across the full photographic field without manipulating the focal length. The proprietary lens design has our Phantom Group wideband multicoating on all air to glass surfaces. This treatment delivers highest transmission combined with lowest amount of scatter and reflections across a very wide spectral range from UV to NIR. The original MPCC had been designed for an f/ratio of f4.5 to f6. The new Mark III however works exceptionally well even down to f3.5. Stars remain pinpoints across the field and the visual use likewise is made much easier - with the help of the 2" (M48) male filter thread at the eyepiece facing side. Photographic Application The base-element 2858400A is prepared for use with a DSLR and a standard T-ring, it can be used over the T-2 thread on all standard T-rings. Since the T-thread vignettes with cameras with larger sensors (such as full-format DSLRs), the T-2 thread can be removed. Then an M48 thread is free and the free aperture increases from 38 to 44 mm. The M48 spacer ring for MPCC III / Protective EOS T-ring can be connected directly to the Protective CANON DSLR T-ring.This means that you do not only have sharp stars in the entire picture but also illuminate large sensors! The idea for this new and much more versatile set was born and Baader recommend their VariLock and focusing eyepiece clamp as best accessories. Visual and photographic application In addition, the MPCC can be used both visually and photographically. The V-1 set # 2454803 contains the necessary adaptors for most eyepieces or cameras with a 1.25 "socket. The basic element of the MPCC can be upgraded at any time for visual use, all necessary parts are also available separately.