BIKIGHT 250W 24V-48V Brushless Motor Control Device Bike LCD Smart Display Bicycle Accessories

Specification: Material Plastic + LCD + metal Voltage DC 24V 3 6V / 48V Power 250W Current 13A Quiescent current 22Ma Angle 120/60 Controller size 86 x 53 x 30mm / 3.39 x 2.09 x 1.18inch LCD display size 90 x 53 x 14mm / 3.54 x 2.09 x 0.55inch Smart display size 85 x 52 x 33mm / 3.35 x 2.05 x 1.30inch Features: Over-heat protection: power will turn off when over-heat, and restart if the temperature is normal. Over-load protection: When overload happens,the motor stall more than 2 seconds, the controller will cut off the current out-put to protect the motor and battery. Dual mode: If the hall motor sensors are broken, controller will operate to none-Hall mode. EABS function:better brake,extend the riding mileage without damaging the motor. Low-voltage protection function helps to extend the battery life. Rushless controlleb: working silently and sensitive. Self-learning matching steps: - Connect Motor Phase Line and Hall Motor Phase line - Connect the battery - Link Two green learning lines together - Connect the LCD/Smart Display and turn it to the highest level. - If it rotates reversely, disconnect the learning line directly, and then plug it in, it will then rotate forward. - Keep rotating forward for about 20 seconds, then directly disconnect the learning line.(DO NOT TURN OFF THE SWITCH) - If it learns successfully which means the learning line will not be needed anymore,you can test the motor by plugging in the throttle. Package Includes: 1 x Motor Controller 1 x LCD Display or Smart Display