BAMILL 3pcs Garage Door Opener Remote Control Duplicator Clone Scanner Car Key 433MHZ

Features: Works with the following remote control IC modules (please check your original remote control before ordering) and your remotes also should be Fixed or Learning. AX5326-3. PT2262. PT2260. EV1527. FP527. PT2242. HT600. HT680. HT6207. HT6010. HT6012. HT6014. AX5326 4. SMC918. PT2240. HT6013. HT6013. HT12D etc Application: garage doors motorcycles car alarm products home security products short-range wireless remote control products industrial control products How to Program: Step 1 –delete the existing of our remote duplicator 1)Click and Hold A and B buttons together - Led will flash 3 times 2)Keep holding A button and release B button 3)Keep holding A button and push B button 3 times Led will start flashing Non-stop Now press any key on the remote control LED lights are not bright so delete success; if you press the button LED lamp is lit indicating that the original is not deleted ! Step 2 - clone your original remote 1)Put both remotes Into back to Back position. Make sure they have direct-contact 2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make 2 blinks then 3 blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation) If for some reason the clone does not go further then 2 blinks it means the signal does not go through please shift the remote slowly up and down until you get the point where it will go through. Specifications: *Working voltage: DC12V (27A battery is not including) *Operating Current: ≤ 8mA *Working frequency: 433MHz *Modulation Mode: ASK (AM) *The transmission power: ≤ 100mW *Emission Distance: 100 m (proof) *The encoding type: self Copy *The working temperature: -10 ° C to +50 ° C *Color: ‎black blue grey (As Pictures Show) *Type: Auto Remote Control Duplicator *Weight: 50g *Material: Metal+Plastic Package Contents: 3pcs Remote Control Duplicator Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.