BAMILL 2pcs 8Inch WoodWorking Band Saw Rubber Band Band Saw Scroll Wheel Rubber Ring

Features: *8 Inch: Use for Band Saw Wheel diameter 205 mm advice bandsaw blade length is 1425 mm. *In order to ensure that the anti-skid rubber ring can be tightly combined with the outer edge of the wheel and avoid slippage and insufficient cutting force due to loose rubber ring the circumference of all anti-skid rubber rings must be smaller than the circumference of the band saw wheel. *The rubber ring has good wear resistance and toughness ensuring that it is not easy to break and loosen after installation. Installation method: 1. Remove the original damaged rubber ring. If there is rubber ring residue on the outer edge of the wheel please clean up the residue first. 2. Soak the new anti-skid rubber ring in warm water for 3-5 minutes and install it after the rubber ring is softened. 3. When installing start from side of the wheel press end of the rubber ring firmly into the groove on the outer edge of the wheel and then use a flat-blade screwdriver to slowly pry the rubber ring into the groove on the outer edge of the wheel. Do not use too much force. It is so violent that the rubber ring is damaged. 4. If necessary you can place a few drops of glue along the grooves on the edge of the wheel to ensure a more secure installation. Please read the above carefully before use！ Specification: Product Name: Band Saw Rubber Band Material: Rubber Color: Yellow Size: 8 x 1/2 x 0.12 (205 * 12.7 * 3mm)(Approx. ) Perimeter before expansion: (Approx. ) 52cm Suitable for: 8 WoodWorking Band Saw Wheel Quantity: 2Pcs Package Included: 2 × Band Saw Rubber Band Note: 1.Transition: 1cm=10mm=0.39inch. 2. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 3. Please allow slight manual measurement deviation for the data. 4.Please after receiving the goods put them in hot water and heat them to spread evenly.