B2 Bluetooth Audio Transmitter Adapter

1. Plug and play, no need to install software drivers2. Support dual stream (TX mode): support one transmitter to connect two bluetooth speakers or headphones at the same time and use one CODEC at the same time, also support APTX LL3. Support multi-point connection (RX mode): support to connect two mobile phones4. Adopt CSR high-end chip design5. One-key switch between RX and TX modes6. There will be a low battery reminder when the power is lower than 20%. The product will automatically enter the sleep power saving mode after 6 minutes in the RX and TX mode without connection. It has its own battery protection IC, which is safe and reliable while charging.7. RCA, I2S audio input/output interface, can be switched freely8. Two antennas, the Bluetooth distance is more than 80 meters, and the stability is strong9. High-fidelity lossless sound quality, ultra-low latency sound output; support apt-X LL, apt-X, SBC, AAC, FS10. Automatic reconnection can be realized in both receiving mode and transmitting mode, and has a memory function for connected products11. Frequency: 2.402GGHz-2.480GHz12. Input/output connection method: RCA interface, I2S AUX interface, support RCA, AUX dual output at the same time13. Battery capacity: 500mAh14. Transmission rate: 2.4Mbps15. Working frequency band: 2.402GHz -2.480GHz16. Battery life: RX about 10 hours, TX about 8 hours on average17. Charging time: about 2.5 hours18. Supported protocols: RX: A2DP/AVRCP, TX: A2DP19. Bluetooth version: V5.0CSR867520. Charging method: Micro USB 5V/0.5A21. Charging power: 2.5w22. Dimensions: 11 x 9 x 2.5cm23. Net weight: 70gProduct acessories:- USB charging cable x 1- 3.5MM audio cable x 1- RCA audio cable x 1- Manual x 1