Auralex D108L-DST Roominator Kit, 54x DST-112 and 54x DST-114 Panels (Charcoal)

Roominator-DST Kits span a wide variety of applications, addressing the acoustic and aesthetic needs of the small project studio as well as the most demanding professional mix/mastering environments.The Roominators D108L offers you all the components you need to attack the acoustics of a smaller Project Studio, and gives you a very professional appearance. The 1' x 1' panels allow you to spread absorption throughout the room in some fantastic patterns. The D108L is also excellent for smaller Home Theaters and can give you an elegant look that will impress even your non-musical friends. Two D108L Kits may be appropriate for medium-sized studios and home theaters, as well as live rooms and rehearsal spaces.Technical DetailsThe D108L has 54 Charcoal Gray DST-112s, 54 DST-114, in your choice of Burgundy, Charcoal Gray, or Purple. For low-end absorption, we've included 8 DST-LENRDs in Charcoal Gray. The included adhesives complete the kit.InstallationDST Panels and LENRD Bass Traps can be mounted to standard drywall with the included EZ-Stick Pro Tabs. Be advised that the EZ-Stick Pro Tabs are designed for permanent installations and will damage drywall and painted surfaces when removed.DST-112 and DST-114 panels use 2 EZ-Stick Pro Tabs each. DST-LENRDs uses 6 EZ-Stick Pro Tabs each.Mark the target position on your wall or ceiling where the product will be mounted using small pencil marks, pieces of masking tape or any similar method. Be sure the surface where the EZ-Stick Pro Tabs will adhere is free of dirt, dust or other oily contaminants by spot cleaning with rubbing alcohol.Remove one of the release layers on the EZ-Stick Pro Tabs and affix it to the rear side of the products perimeter, usually near the corners. Apply firm pressure and wait about 5 minutes for the adhesive to set. Remove the second layer of the release paper from each of the EZ-Stick Pro Tabs, carefully orient the panels position prior to contact with the wall, then press in place with moderate pressure.- DST Panels -DST-112 & DST-114 panels reduce mid-high frequency reflections, flutter echo, room ring and excessive reverberation. To maximize performance in a project studio or control room, consider placing the panels at the first reflection points located to the sides, front, rear and ceiling above your listening position. To maximize performance in a live room, consider spacing the panels evenly throughout the room and staggering treatment across parallel surfaces.- DST-LENRD -It s only natural a Designer Series LENRD to complete our popular DST line-up. DST-LENRD Bass Traps offer you all the great benefits of our ever-popular LENRD Bass Traps in a design that will definitely make any DST install look stellar. When doing an install needing some low frequency sound control, the DST-LENRD Bass Trap is a great design alternative.- EZ-Stick Pro Tabs -Clean attachment points on the wall surface with Isopropyl alcohol (avoid household cleaners), wipe gently and let dry. Separate the EZ-Stick Pro Tabs from each other. Remove one of the paper release liners from the strip. Apply the tabs on the rear of the panel near the outside edges with heavy, uniform pressure (heel of hand). Orient vertically for maximum holding strength. Remove the second paper release liner from the backside of the tab, position the panel with the target location on the wall and press firmly to attach. Use 4 tabs for a 2' x 2' Studiofoam panel and 6 tabs for a 2' x 4' panel.