Auralex Alpha-DST Roominator Kit, 32x DST-112 and 32x DST-114 Panels (Burgundy)

Fresh off the success of our best-selling Alpha 1 kit, Auralex introduces the sleek, new Alpha-DST Roominators Kit. Not only will the Alpha-DST take the guesswork out of acoustics, but it also improves the sound of everything you record!Now you can actually hear (and record) ONLY the source and NOT what's bouncing off the walls and ceiling. You'll achieve better sound out of your existing equipment and get more enjoyment out of your room!Technical DetailsThe Alpha-DST Kit is designed primarily for rooms with a floor square footage of InstallationDST Panels and LENRD Bass Traps can be mounted to standard drywall with the included EZ-Stick Pro Tabs. Be advised that the EZ-Stick Pro Tabs are designed for permanent installations and will damage drywall and painted surfaces when removed.DST-112 and DST-114 panels use 2 EZ-Stick Pro Tabs each. DST-LENRDs uses 6 EZ-Stick Pro Tabs each.Mark the target position on your wall or ceiling where the product will be mounted using small pencil marks, pieces of masking tape or any similar method. Be sure the surface where the EZ-Stick Pro Tabs will adhere is free of dirt, dust or other oily contaminants by spot cleaning with rubbing alcohol.Remove one of the release layers on the EZ-Stick Pro Tabs and affix it to the rear side of the products perimeter, usually near the corners. Apply firm pressure and wait about 5 minutes for the adhesive to set. Remove the second layer of the release paper from each of the EZ-Stick Pro Tabs, carefully orient the panels position prior to contact with the wall, then press in place with moderate pressure.- DST Panels -DST-112 & DST-114 panels reduce mid-high frequency reflections, flutter echo, room ring and excessive reverberation. To maximize performance in a project studio or control room, consider placing the panels at the first reflection points located to the sides, front, rear and ceiling above your listening position. To maximize performance in a live room, consider spacing the panels evenly throughout the room and staggering treatment across parallel surfaces.- DST-LENRD -It's only natural... a Designer Series LENRD to complete our popular DST line-up. DST-LENRD Bass Traps offer you all the great benefits of our ever-popular LENRD Bass Traps in a design that will definitely make any DST install look stellar. When doing an install needing some low frequency sound control, the DST-LENRD Bass Trap is a great design alternative.- EZ-Stick Pro Tabs -Clean attachment points on the wall surface with Isopropyl alcohol (avoid household cleaners), wipe gently and let dry. Separate the EZ-Stick Pro Tabs from each other. Remove one of the paper release liners from the strip. Apply the tabs on the rear of the panel near the outside edges with heavy, uniform pressure (heel of hand). Orient vertically for maximum holding strength. Remove the second paper release liner from the backside of the tab, position the panel with the target location on the wall and press firmly to attach. Use 4 tabs for a 2' x 2' Studiofoam panel and 6 tabs for a 2' x 4' panel.