Audio-Technica ATW-1377 System 10 PRO Rack-Mount Digital Wireless System

Designed to work with phantom-powered, condenser gooseneck microphones with a 3-pin XLRM-type output, the ATW-T1007 System 10 Microphone Desk Stand Transmitter pairs with the System 10 or System 10 PRO digital wireless receiver of your choice to provide rock-solid, 2.4GHz wireless performance. The transmitter is equipped with a 3-pin XLRF-type input and features a touch-sensitive user switch that can toggle between talk and mute modes or function as a press-to-talk or press-to-mute button. Two red/green LEDs - one visible from the front of the unit, the other from the rear - indicate toggle/talk/mute mode, battery level and charging status.• Pairs with any System 10 or System 10 PRO digital wireless receiver• 3-pin XLRF-type in for quick mounting of gooseneck microphone• Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance• Operates in the 2.4GHz range - completely free from TV interference• User switch can be set to toggle between talk and mute modes or function as a press-to-talk or press-to-mute button• Gain Control switch allows selection of three input gain levels: -6 dB (for loudest voices), 0 dB and +6 dB (for softest voices)• Two red/green LEDs - one visible from the front of the unit, the other from the rear - indicate toggle/talk/mute mode, battery level and charging status• Switchable low-cut filter• System ID Display located on bottom of unit• Automatic frequency selection for seamless, interference-free operationThe ATW-T1007 also offers three levels of input gain (-6 dB, 0 dB and +6 dB), which can be selected via a switch on the bottom of the unit. Another switch engages the low-cut filter. The 3.7V rechargeable lithium-ion battery provides nine hours of use on a full charge and is easily recharged with the included USB charging cable. ATW-RU13 Receiver The ATW-RU13 receiver unit features two detachable antennas that screw onto the face of the unit via SMA connectors. The rear of the unit is equipped with a 1/4"-20 thread socket for mounting the receiver unit remotely to a tripod or other device with a 1/4" screw. An RJ45 connector, also on the rear of the unit, allows a remotely mounted receiver unit to be connected to the chassis with UTP cable. • Receiver unit for System 10 Pro• Two detachable antennas with SMA connectors• LED status indicatorAn LED status indicator, located between the mount socket and the RJ45 connector, blinks slowly when the receiver unit is not paired with a transmitter, blinks quickly during the pairing process and illuminates solidly green once the receiver unit is paired with a transmitter. An AT8690 RU13 Holder is supplied for each receiver unit, providing a convenient means to mount the unit remote.