Astera AX1 8x PixelTube Set with Charging Case

AX1 is a powerful pixel controllable LED RGBW baton that can be mounted at event and film sites to light up people and objects or create indirect lighting effects. A highly creative device that offers an infinite range of possibilities.• Max. 20h• App• Wireless DMX• IP65Astera SystemA smart control system where Infrared remote, wireless DMX and app work together to enable big setups that can be set up, monitored and adjusted in a fast and convenient way.App control (UHF)Control LightsCreate complex programs out of colors, effects, and settings. The AX1 Wireless PixelTube will remember and repeat these effects without requiring a constant wireless link. Quickly create groups of lights, assign positions and select which the PixelTube should receive commands.Monitor lightsKeep a complete overview of the status and all settings of your PixelTube while you operate them. View battery status, radio signal, DMX address and which lights you have targeted.Diagnose individual PixelTube or Astera Event Spotlights and even get informed if a light is being moved or switched off. This works while you control lights by the app but also if AX1 PixelTubes are controlled via DMX.Set-up fasterSet up your PixelTube conveniently out of the distance. Set DMX address and DMX footprint for one or several PixelTubes or Wireless Event Spotlights; 50 units can be prepared in less than 5 minutes out of the distance. After your job, do a quick master reset of all settings or a partial one of only selected settings.Wireless DMX (2.4GHz)LumenRadioThe AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR adapter to your DMX console and you can transmit 1 DMX universe with CRMX technology, the most stable wireless DMX protocol available.CompatibilityThe AX1 Wireless PixelTube carries the most reliable wireless DMX module on the market compatible with CRMX and other wireless DMX standards but not W-DMX G5 and City Theatrical.IR Remote ControlSimple commands like ON/OFF, colors, preloaded effects etc can be sent with our infrared remote control directly to the lights. When programming lights with the AsteraApp the IR remote can be used for confirming settings on individual lights.Unique Astera FeaturesTalkback+Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.Seamless runtimeSet the length of your event and be sure that your lights won't run out while still getting the maximum brightness.TruColor calibration100% color consistency through any batch. It can hit exact color temperatures and reproduce standard filter gels.Filming ToolsScrambled PWM technology to avoid flickering when filming, green/magenta balance to minimize post-production work.Anti-theftThe lights give visual and audible alarm and send notification to the AsteraApp if they are being moved during an event.DJ featureAuto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.Scheduled stand-bySwitch lights into power-saving standby and schedule them to wake up when the event starts.Dynamic power-boostThe dynamic power-boost feature enables the light to display the maximum brightness at all times and intensify non-white colors.Emergency lightSwitches automatically to white light and runs of its battery when AC power is cut off.