Ashly NXP752 2-Channel Multi-Mode Power Amplifier with Protea DSP and OPDante

NX Multi-Mode Power Amplifiers are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centres.Available in three amplifier series, NX offers 2 or 4-channel models as NX (base model series), NXE (networkable), or NXP (networkable + DSP).Class-D Switching Amplifier TechnologyNXP features a universal switch-mode power supply with Power Factor Correction (PFC) that operates from 70VAC to 270VAC.Multi-Mode OperationSelectable Outputs allow you to choose the desired output mode on each channel. Set the DIP-switch configuration for Low Impedance (2, 4, and 8 Ohm), or 25V, 70V, or 100V Constant Voltage and you're set to go.Energy EfficiencyNXP has power-saving Ashly EMS (Energy Management System) which provides an automatic sleep-mode drawing less than 1 Watt (defeatable).Ethernet Control using Protea NE softwareAlso, serial data control by Ashly programmable remotes or third party controllers, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, optional Dante, CobraNet, or AES3 digital audio capability (factory-installed)Real-Time Clock with Event SchedulerAssign automatic execution of selected functions and tasks. The event scheduler is programmed from software and stored in the amplifier.Ashly Remote Control via iPad appUse our free Ashly Remote app available for custom design of secure wireless control over network.32-bit SHARC DSP Processing at 48kHz or 96kHz Sample RatesComprehensive software control of digital signal process-ing, matrix and auto-mixing, built-in signal generator for test tone and noise-masking, swept output load impedance monitoring. Use Ashly Remote iPad control to select DSP functions including gain, mute, matrix, A/B source select, PEQ filter level, and meters.FIR Filter-ReadyOur PneS software will load a speaker manufacturer's .fir or .csv file to achieve precision tuning.nXp752: Architect & Engineering SpecsThe unit shall be a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power shall be 75W per channel at Low Z, 75W per channel in 25V mode, 75W per channel in 70V mode, and 75W per channel in 100V mode. There shall be an automatic but defeatable sleep mode consuming Protea Digital signal Processing for nXP AmplifiersProtea is compatible with Microsoft Windows 10, 8, 7 (Vista/XP) 32 & 64 bit systems. Audio professionals find our Protea DSP to be very intuitive and easy to navigate - and you will too.rotea DSP is designed for the nXp Amplifier, Pema, ne Series Amplifiers and Processors, the ne24.24M Matrix Processor, and Protea System Processors.