Aputure V-Mic D2 Sensitivity Directional Condenser Shotgun Microphone

Aputure V-Mic D2 Sensitivity Adjustable Directional Condenser Shotgun Microphone For DSLR Camcorder Features: 1. Professional Audio PEAK Indicator The audio PEAK indicator lets you see and track the audio levels recorded. It warns you if your audio levels exceed your recording levels, which may cause your clips to result in audible distortion. When an audio clip is approaching peak levels during recording, the led blinks red. To avoid having the clip volume of your audio exceed peak levels, adjust the sensitivity. The peak level indicator can help you monitor your levels with ease. 2. Low Power Indicator The battery warning beside the mode switch blinks red to alert you that it has insufficient battery power to support its tasks. When the power indicator blinks red, it is time to replace the batteries as soon as possible because this means that the battery life available has reached 1% or less. If no new power is supplied, it will shut down automatically. This protects the microphone. 3. Tri-Isolation System The V-Mic D2 has an innovative isolation system with two forms of anti-shock mounts and a special shockproof design inside of the microphone. Two forms of anti-shock mounts separate the V-Mic D2 capsule and electronics from its mount and provide isolation from external physical factors that may cause unwanted bumbles and vibrations in the microphone. Also, with a reliable internal isolation system, the microphone is fit for any use ranging from protected studio use to run-and-gun guerilla or extreme shoots. 4. 1/4 inch Metal Hot Shoe Mount The microphone uses a metal standard-sized hot-shoe mount for DSLR camera use, but also features a 1/4 inch thread in the base of the mount for variable mounting. Since it incorporates both mounting options, the V-Mic D2 can be used on any rig, boom pole or custom set-up. 5. Compact Locking Wheel The V-Mic D2 also features a custom locking wheel. When you rotate the wheel tightly, it'll lock your microphone in place and ensure that it stays right where you left it. It's a simple, but dampened rotation. It also uses a high-quality ABS turning system to guarantee a long lifespan. Even though it uses very little pressure to mount the shotgun, you can rest assured that the shotgun mic will locked in place. 6. Wind-Screen and Wind-Shield Included We provide you with both an elegant wind screen and a sound-absorbing wind shield inside of the package. They are both designed for recording outside and preventing the capture of unwanted wind noise. Each unit has good air permeability, which ensures the sound you capture sounds just as it does in real life. Even though they are most commonly used outdoors, both are also helpful when used in the conference room, news, stage performances and other public places. Specification: Transducer Principles Back Electric Condenser Dynamic Range 114dB ( per IEC651 ) Polar Pattern Super Cardiod Maximum SPL 134dB (@1kHz, 1% THD into 1k ) Frequency Range 20Hz~20kHz THD 0.5% Output Impedance 200 LCF 100Hz Sensitivity -50dB~-10dBre 1V/Pa @1kHz Power DC 3.0V ( AAA 1.5V x 2) Signal to Noise Ratio 74dB SPL (@1kHz, rel 1Pa per IEC651) Dimension 194mm x 44mm x 92mm Battery Life > 100h Weight (No Battery ) 126g Manual: Click here Package Included: 1 x V-Mic D2 Directional Shooting Microphone 1 x Wind Screen 1 x Wind Shield 1 x Signal Cable 1 x Audio Cable 2 x Energizer Battery (AAA 1.5V) 1 x Guarantee Card 1 x Brochure