Andoer 500W Brushed Spindle Kit Engraving Machine Spindle 500W Motor Kit ER11 MACH3 Power Supply Governor for Solid Wood PCB Engraving Drilling

Features: With small size and high speed the motor operate quietly. The rear of the motor is equipped with a cooling fan which can work for a long time with confidence. The pulse width technology is used to make the speed more stable and the is strong at low speed. With over-current protection cut-off device to make the performance more reliable. With a soft start device to eliminate excessive starting current of the motor. (Power supply)Governor is lightweight small heat low noise high efficiency and energy saving. With overload protection short circuit protection overvoltage protection overheating protection. Spindle radial runout 0.01-0.03 high . Can be used for solid wood / PCB engraving and drilling etc. Install in the place with good ventilation no violent shock no vibration no explosive medium and no conductive metal powder. Applicable to 3018 3020 3040 1*1 meter 6565 4545 engraving machine model. Specifications: SPINDLE: Peak Power: 500W Speed: 3000-12000rpm Cooling: Air cooled Collets: ER11 Diameter: 52mm Working Voltage: 100V DC Idling Speed: About 1000-12000rpm Peak Torque: 0.5NM Insulation Resistance: >2 megohms Dielectric Strength of Insulation: 400V Size: 199 * 56mm / 7.83 * 2.20in Weight: 900g / 31.77oz (POWER SUPPLY)GOVERNOR: Input Voltage: AC 110-±10% global voltage 5060Hz Output Voltage: DC 0-100V Output Current: 6A Adapter Motor Power: 50~500W Armature Output Voltage: DC0～100V adjustable Size: 140 * 110 * 50mm / 5.51 * 4.33 * 1.97in Weight: 446g / 15.73oz 52MM CLAMP: Inner Diameter: 52mm Material: Cast aluminum Use Route: Fixing of the engraving machine spindle Size: 89 * 53 * 39mm / 3.50 * 2.09 * 1.54in Weight: 292g / 10.32oz WORKING ENVIRONMENT: Working : -20～60°C Working Humidity: 20~90%RH Install in the place with good ventilation no violent shock no vibration no explosive medium and no conductive metal powder Package Weight: 1921g / 4.24lb Package Size: 25.3 * 20.3 * 7cm / 9.96 * 7.99 * 2.76in Packing List: 1 * Spindle 1 * Governor 1 * ER11 Collet 1 * ER11-8mm Spindle Connector 1 * 52mm Clamp 4 * Screw 1 * Manual (English)