Alloet HTRC 7-stage Pulse Repair 1 A 12V/24V Smart Lifefo4 Battery Chargers (AU)

HTRC 10A LCD Display 12V/24V Smart Car Battery Chargers 7-stage Pulse Repair Charging for Lithium Lead-Acid Lifefo4 AGM Feature: 1. High efficiency (> 85%). 2. Lithium lead acid and lithium iron phosphate battery types are available. 3. 7 Paragraphs of microprocessors control the charging process. Provide the best application and achieve efficient battery charging. 4. The charging voltage adapts to the temperature to prevent the battery from overloading or owed. 5. Can charge the battery that is severely discharged or severe sulfuric acid. 5. Counter protection short -circuit protection overcharge protection and parking free contact. 7. LCD display: voltage current temperature etc. 8. Easy to use. Clear charging state display. 9. Full microprocessor control. 10. Even if you keep connecting in any mode do not over-charge. Specification: Brand: HTRC Input voltage: 110-265V AC 50-60Hz Rating output: 12V/10A 24V/5A Minimum starting voltage: 9.0V Battery range: 2-150Ah Power: 120W Various modes: Lithium / LifePo4 / Leadrite / Car / Motorcycle / AGM / GEL Lithium: 12.6V/25.2V Battery Management System (BMS) Lead acid: AGM/Gel/Wet Battery Lithium iron phosphate: Motorcycle battery Air load input power: 2.8W Air load output voltage: 27.6V Model: Summer and winter Display: Voltage current temperature repair completion reverse Hot protection: 65c +/- 5c Concerning standards: CE FC ROHS PSE Size (length X width X height): 159x90x50mm/6.26x3.54x1.97in Cool down: Fan Plug type (optional): EU US UK AU Function: Touch switch mode technology / polar protection Output short-circuit protection Non-battery link protection / over-temperature protection Short-circuit protection / overcurrent protection Excessive protection / fire protection / low voltage protection Over-voltage protection/reverse protection/electric shock protection Describe: Lithium battery mode: charge for 12.6V or 25.2V lithium battery. After choosing lithium-blue LED will illuminate. It is only used for batteries with a battery management system (BMS). Lead-acid battery mode: suitable for AGM GEL SLA WET Deep Cycle EFB calcium battery. Motorcycles and lithium iron phosphate battery mode: Advanced battery recovery mode is used to repair and store old idle damaged layered or sulfuric acidization. Not all batteries can be recycled and can only be used for motorcycles and car batteries. Note: This charger is suitable for battery capacity between 2AH and 150AH. Check the battery capacity (AH) before purchasing the charger! Thanks! Due to the different monitor and light effect the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. Included: 1 X 12/24V Pulse Repair LCD Charger 1 X Power Cord 1 X Thick Alligator Clip 2 X Copper Sheets 1 X English Manual