Across International ECO 150C 1.9 Cu Ft Vacuum Drying Oven With LED Lights

? AT19e series digital desktop vacuum ovens feature a 1.9 cubic foot easy-to-clean stainless steel chamber with a large dual-layer tempered glass safety window and small footprint. These ovens can greatly reduce drying time by maintaining a consistent vacuum level within the chamber. Every one of our vacuum ovens goes through a 2-time 24-hour vacuum leak test and is 100% quality controlled in New Jersey or Nevada before leaving our facilities. Attention: Before initial use run oven at 200C/400F without vacuum for 15 minutes to burn off any residue that may have been introduced during the manufacturing process. IMPORTANT! NEVER LEAVE YOUR OVEN UNATTENDED WHILE OPERATING. Across International is not responsible for any loss of material inside of the oven. Features Oil-filled mechanical vacuum gauge provides more accurate reading longer gauge life and minimizes shipping damage. Adjustable gas back fill capability with needle valve and vent port. 3rd gen LCD low proportional gain temperature controllers keep your oven temperature accurate Best choice for the curing and converting of oil extracts. With deep vacuum level they can operate at temperatures which allow the degassing/purging process to occur rapidly thus increase productivity and allow for the production of superior quality products with minimal processing time. Dual layer observation window with 1/2 tempered safety glass. 3 thermal insulation prevents heat loss and minimizes the enclosures outer surface temperature. Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance. Built-in alarm alerts you when oven has been shut down by safety circuitry due to out of range temperature. All ovens shipped from our New Jersey or Nevada location for quick delivery and come with two year warranty and lifetime US-based parts and service support. Guaranteed US based phone and email assistance within 30 minutes from our engineers. Manufactured in accordance with ISO 9001:2000 ISO 12100-1:2003 ISO 12100-2:2003 EN1050:1996 EN294:1992 EN60204-1:2006 CE ? ? ? ? AT vacuum oven installation and calibration (English) ? AT vacuum oven installation and calibration (Spanish) ? ? ? Vacuum Oven specifications ? ?Electrical requirements ?110V +/-10% 60Hz 1-PH 13.6A 1 500 watts ? or ?220V +/-10% 50/60Hz 1-PH 6.8A 1 500 watts ?Chamber ?Size: 16.5 x 14.5 x 14 ?Material: Stainless steel ?Capacity: 1.9 cubic foot ?Heater ?3-sided heating (left 400W right 400W bottom 700W) ?Temperature control ?Controller:?3rd gen low proportional gain microcomputer PID controlled ?Range: ambient to 150?C ?Display units: Fahrenheit or Celsius ?Uniformity: +/- 5% of setpoint ?Dwelling timer range: 1 to 9999 minutes ?Warm-up time to 480?F: 90 minutes ?Vacuum ?Ultimate vacuum level: better than 500 microns/millitorrs ?(may vary based on your altitude) ?Mechanical gauge range: 0 to 30 inch mercury ?Vacuum port: KF25 flange x 1 ?Vent port: