AXIAL 1/10 Wraith Spawn 4WD Ready to Run (RTR) Racer(Multicolor)

The Axial Wraith Spawn is packed with performance features. The virtually bulletproof AR60 OCP axles are ready take the Spawn through its paces whether blasting through the wide open desert or hammering its way through the toughest rock trails. The Ripsaw 2.2 tires are a proven true grip standard, wrapped around industry proven Method IFD beadlock wheels. Whether you are rock racing or just backyard bashing, the Wraith Spawn is ready for action.The waterproof receiver box utilizes three different silicone seals: one for the antenna, one for the servo wires (includes three slots for three channels), and one acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!Our dual slipper design clutch uses a pad on each side of the spur gear for added surface area. This allows for more precise tuning and holding power. The spur gear features strong, 32 pitch gearing for high torque applications.Officially licensed Method 12 spoke beadlock wheels dressed in an aggressive all black style are easy to assemble and they work with most 2.2 tires. The hub design allows this wheel to mount to any Wraith, AX10 Ridgecrest or SCX10. Axial 2.2 Ripsaw tires offer both a realistic and aggressive tread design for the ultimate scale appearance and performance.The Axial waterproof AE-5 ESC is 3S LiPo capable yet easily switched in the field between LiPO and NiMh battery types with a simple jumper.The AX-3 2.4GHz transmitter is a two channel, pistol grip radio with servo reversing switches for steering and throttle, trim dials for fine tuning steering and throttle centers. The battery indicator light also lets you know when your transmitter batteries run low. AR-3 2.4GHz receiver uses no crystals so you'll experience worry free driving with no frequency conflicts. This lightweight, compact, and bind button equipped receiver with LED indicator makes setup easy.The included Tactic water-resistant TSX45 metal gear servo is rated at 151 oz-in of torque for massive turning power and dual ball bearings provide smooth and precise movement for the metal gear train.The WB8 HD front and rear driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.The Wraith Spawn includes a realistic driver figure complete with a race suit and three interchangeable helmets. A motocross, open skull-face or motorsport version of the helmet are included.The Wraith Spawn includes a number of features that are either waterproof or water resistant. Do not run your product in water or snow or submerge it in water without fully waterproof gear.Requires: 6-cell NiMH or 2S LiPo pack, charger and four "AA" batteries