AKS 3D Professional Handhold Metal/Gold Detector 2500M Long Range Diamond Finder

Specifications: Product Name: Metal Detector Model: AKS Color: Yelllow Shell Material: Metal Case size: Approx. 38x28x10cm Search Range: 2500m Detecting Depth: 25m Energy: 12V 1600mAh Launch Frequency: 5.6-6KHz Signal Frequency: 360-440Hz Working Time: 4-5h (After fully charged) Detection Type: Gold, Silver, Copper, Diamond, Precious Stones Search System: Microcomputer CPU control and reflection conductivity. Feature: - The strongest product kernel, intelligent modular operation - Powerful + convenient + efficiency + speed - Easy to use, advanced and efficient. Boot Test: Open the host with the search device switch, the search is work blink, when host preference copper gear, a search is corresponding copper instructions parade light, in turn, choose the host other silver, gold, and precious stones gear, a search is corresponding to the light of the instructions of the light. Charging Methods: The instrument has been installed rechargeable batteries, direct access to the charger,can charge, charging time for 10-12 hours. Operation Method: -The main vertical hanging at the waist, and try to keep the legs parallel, if you are use the right hand operating search instrument, hang on the right waist, if you are left-handle, hang on the left. -The searcher tilts up 1-3 degrees; when holding the searcher, the hand should clamp the body, do not shake; when walking, pay attention to the scanning speed, if the speed is slow, the movement is not enough, it will not polarize the instrument. And if the speed is too fast, it will hinder the discovery of the probe. Maintenance and Maintenance: - Do not remove or modification of instrument. - In the process of operation to avoid mobile phone or other metal near the instrument. - Please at 0-40 temperature and 10%-30% humidity environment use this instrument is the best. - Use wire, needle etc metal will short circuit batteries, also will not battery with necklace metal put together, it could lead to electricity leak, overheating, burst and fire. - Do not charge for more than 24 hours. Please use the 220V. Note: new battery only through two or three times complete charge and discharge cycle to achieve the best effect. - Away from the dust and dirt, they can lead to corrosion and wear parts. - Regularly with wet cloth to wipe the probe to keep its appearance neat and clean like new. Not using harsh chemicals cleaning products. -The plugs connected to the head must not be damp. After the plug is wet, the detector does not react to any metal. In this case, the plug can be dried before use. -The instrument case is not waterproof. Can not be washed, can only be cleaned with a towel. It cannot be operated outdoors during rainy days. -Protect the instrument from extreme cold, and excessive freezing can damage the machine. Don't let it shine in the sun -The salt water is extremely corrosive. If the instrument touches the salt water, it should be washed thoroughly with water immediately. Be careful not to let the water enter the box and quickly dry it with a towel. Package Included: 1 x Aluminum Case 1 x Transmiter 1 x Charger 1 x Receiver Scanning 1 x English User Manual Details pictures: