AC85V-220V 433MHz RF 2*1 Channel Remote Control Switch Relay Module+Switch Panel For LED Light Smart Home

Specifications: Input voltage: AC85V-AC220V RF operating frequency: 433MHz RF mode of operation: superheterodyne reception Receive sensitivity: -107dbm Remote control distance: open space is more than 100 meters. Number of remote controls that can be stored: 32 Support remote control type: learning code, fixed code (customizable rolling code). Multiple working modes: jog, self-locking, interlocking. Wiring method: fixed wiring post Instructions: Clear and match the code (Note: the same one needs to be replaced, please clear the code first.) Jog function: Press the learning button once, the LED indicator flashes once, and when the LED indicator is lit, press the remote control button that needs to be coded. The LED of the control panel flashes continuously for 3 times. Self-locking function: Press the control board code button twice in succession. The LED indicator flashes once. When the LED indicator lights up, press the remote control button that needs to be coded. The LED of the control panel flashes continuously for 3 times. Interlock function: Press the control board to press the button three times in succession. The LED indicator flashes once. When the LED indicator is lit, press the remote control button "A" that needs to be set to open. After the control panel LED flashes, continue. The setting is set to off by pressing the remote control "B". The LED flashes and the setup is complete. Clear code function: Press the control board code button 8 times in succession. The LED indicator flashes 8 times. At this time, the LED indicator will automatically flash 8 times continuously, then the clear code is completed, and all the remote control button codes that have been learned before are cleared. Wiring Instructions: L: Firewire input N: neutral wire input OUT L: Firewire output OUT N: neutral wire output Package Included: 2 x Wireless Remote Control Switch Realy With Case 1 x Switch Panel