AC220V 1CH RF Wireless Remote Control Switch

The wireless signal can pass through walls, floors and doors. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance. It applies to lights, auto door, window, motor controller, water pump and more.
Learning Method
Hold the learning key until the indicator off. , then press any button of remote, indicator will flash 4 times, then will keep lighting,it means it learns successfully.
Note: the controller can learn fixed code (PT2262, SC2260 chip, etc.) / learning code (EV1527, ) 20 different code
Clearing Method
Continuously hold learning key about 8 seconds until the indicator put out, then keep lighting, it means it clears successfully.
Working Way Switching
Through the sub circuit board behind the pad 1, 2, 3 different local to switch working way
1 jog1, 2, 3 pads non-occupation, not connect
2 self-lock, shorted 1, 2
3 inter-locking shorted 2, 3
Jog: Press the button is ON. loosen your finger is OFF
Self -lock: Press one button for one time is ON .press the same button again is OFF
Inter-lock: Press one button is ON , press another button is OFF.
Specifications
Working Voltage 220V
Work Frequency 315MHz/433 MHz
Maximum Load 1500 W
Working way Jog , self-lock and inter-lock (Adjustable by pad)
Circuit Board Size 60 x 30 x 17 mm
Shell Size 66 x 36 x 21 mm
Package Contents 1 x Receiver(with cover), 1 x Transmitter(with battery)