8X Metal Hold Down Brackets and Pins Blind Brackets Blind Holder Replacements for Horizontal Blind Shades Window

Installation procedures: 1. What you need: drill screwdriver tape measure hammer pencil. 2. If the bottom rail is not fitted with pins drill a . 1/2 inch deep 7/64 inch or 3/32 inch bit in the center to hold pins on both sides of the rail. 3. Punch the pins in. 4. Put the blind plate down put the bottom rail flat in place and the position of the fixed bracket with a pencil. 5. Screw the bracket to the door. 6. Measure the position of the bracket now screwed to the door and on the other side. 7. Then repeat the above steps to install the second bracket. colour: silver Material: metal Size: About 42x32.2mm Package Contents: 8 x Hold down brackets With screws 8 x Pin Only the above package content other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.