8W Solar Battery Panel 100A Solar Charge Controller Kit Intelligent Circuit For Camping For Outdoor Work For Industry

8W Solar Battery Panel 100A Solar Charge Controller Kit Intelligent Circuit for Camping for Outdoor Work for Industry Specification: Item Type: Polysilicon Solar Panels Kit Weight: Approx.500g / 17.6oz Material: Polycrystalline Silicon + PET Lamination + Plastic Controller Housing Product Size: Solar Panel Size: Approx.31 x 19cm / 12.2 x 7.5inController Size: Approx.13.3 x 7 x 3.2cm / 5.2 x 2.8 x 1.3in Solar Panel Chip: Polysilicon Cell Solar Panel Power: 8W Solar Panel Voltage: 5V/12V Solar Panel Current: 0.67A Solar Panel Output Interface: Dual USB And DC Interface Controller Voltage: 12V / 24V Automatic Identification Controller Current: 100A Maximum Photovoltaic Input Power Of Controller: 1800W（12V），3600W（24V）Standby Current Of The Controller: < 10MA Controller USB Output: Dual USB Output 5V / 2.5A Controller Operating Temperature: -35 degrees Celsius ~ +60 degrees Celsius Package List: 1 x Solar Panels 1 x Car Charging Connector 1 x Battery Clamp Cable 4 x Sucker 1 x Solar Panel Manual 1 x Controller 1 x Controller Manual Note: Reverse order is applied when uninstalling incorrect order may damage the controller. Please refer to the manual for specific use. Solar panels note: 1. When charging make sure the solar panel faces the sun. 2. Avoid contact with impactors and other incisive objects. 3. Don t bend solar panels so much that they snap. 4. Keep the panel cover clean when charging so as to ensure the high efficiency of solar panel power generation. Controller note: 1. The controller is automatically identified by 12V/24V. When installing the controller for the first time ensure that the battery has enough voltage so that the controller can identify the correct battery type. To the life of the battery the solar controller will automatically turn off once the battery voltage drops below 8V. 2. Install the controller as close to the battery as possible to avoid voltage drop caused by too wires which may affect normal voltage judgment. 3. This controller is only suitable for all kinds of acid batteries including open sealed colloid etc. do not use in other batteries including lithium batteries nimh batteries etc.. 4. The controller can only use photovoltaic panels as charging sources do not use DC or other power sources as charging sources. 5. The controller will heat up when it is running. The operating temperature of the controller is -35°C ~ +60°C. 6. The LCD display of this controller has 0.2V-0.3V error but this is normal.