86 Wall Panel Transmitter RF Remote Control Switch 3 Button - 1 x Transmitter + 3 x Receiver

This 86 Type 3 Button Wall Panel Transmitter can be learned into most of the learning code receiver. It can be stuck anywhere with the 3M sticker included.
Features:
86 panel wall remote transmitter with 3 buttons.
Can be stuck anywhere.
It is a learning code transmitter with EV1527 IC Chip.
It can be learned into most of the learning code receiver.
Working/Output Way:
Jog/Non-Latched: Press one button is working /ON. loosen your finger on the same button is stop/OFF. One channel switch need one buttons remote control.
Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF(one channel switch need one buttons remote control).
Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF( one channel switch need 2 buttons remote control).
Learning Method:
Keeping press the learning button, the LED indicator flash fast then press the transmitter button, until the LED indicator stop to flash fast, it mean learning successfully.
Remove Code:
Keeping press the Learning Button on the receiver until the LED indicator flash fast until it flash slow 2 times. It means the code have cleared successfully.
Specifications
Working Voltage AC220V (Input AC220V Output AC220V)
Max. Current 10A (have better lower than 7A )
Channel 1CH
Working Frequency 315MHz/433MHz
Receiver Sensitivity -105Db
Working Temperature -10℃ - +60℃
Output Way Momentary. Toggle. Latched Adjustable
Code Type Learning code Add Controller by the Learning Button on the receiver
Transmitting Distance 10-200m
Package Contents 1 x Transmitter, 3 x Receivers