8 Inch Wooden Handle Printing Squeegee Ink Scraper Blade 70 Durometer Ink Scraper

Introduction: - Squeegee is also called scraper, it is one kind of tool that used to scratch the ink on the screen to make it leak to the substrate. - Use for both graphic and textile applications, for all hand printing and many machine applications. - These squeegees are Kiln-dried and precision cut lumber is used for the no-warp handles, which are smooth, comfortably shaped and easy to handle, helping in eliminating any symptoms of carpal tunnel syndrome. - Blades are molded under high heat and pressure and have a tensile strength of more than 2,000 lbs. This eliminates ink streaking and provides a superior long-lasting printing edge. Specification: Material: Natural Rubber, Wood Hardness: 70 Durometer Length: 20cm/7.9" Width: 10cm/3.9" Thickness: 2.3cm/0.9'' Features: Features a single durometer blade with flat bottom. Single piece of polyurethane material. Designed to balance the squeegee's resistance to all types of different inks. Maintains a high resistance to abrasion. Features a classic style contoured wooden handle. Smooth Hardwood Finish. Approximately 1.5" of Polyurethane is exposed from the wooden handle. Note: - A Durometer Instrument or Gauge was not used to test hardness of the squeegee. - The hardness of squeegee material usually falls between 50 and 90 with 50 being the softest and 90 being the hardest. - In our opinion these are medium-soft as they are somewhat pliable and if you press your nail into the rubber it will leave an indentation. We would give this a rating of 60, being Medium-Soft. Package Included: 1 x 20cm Screen Printing Squeegee Blade More Details: