702PCS Bagged Ceramic Tile Leveling Leveler T-shaped Adjuster Cross Paving and Wall Tile Positioning Tool

Feature ● Abrasion resistant and recoverable ● Easy to carry out DIY operation ● Keep the tile balance in the same horizontal position ● Improve tile installation speed ● Reduce the fatigue stress of the installer ● Almost no lip slip flat surface ● Reduce the need for grinding and polishing ● Prevent the tiles from moving during curing Use suggestions 1 Lay the first tile leaving a distance of more than 2mm used with cross spacers Close to the tiles 2 Insert the T shaped needle along the gap of the tile 3 Then rotate 90° to clamp the T shaped needle at the bottom of the two tiles 4 Use your hand special wrench to adjust the cover until both tiles are on the same level 5 About 5 6 hours after leveling before the cement adhesive is completely dry rotate the cap in the opposite direction and remove the 180° T shaped needle until the words are taken out Package Included 100 X Jorizontal Wedge Tile Gasket2 X Wrench600 X CrossTips 1 The tile gap must be 2mm or more than 2mm can be used with the complimentary cross card 2 Leveling time one clean up the cement or tile glue and other debris around the stainless steel3 4 6 hours after leveling before the cement or tile glue is dry take out the levelerNotes 1 Due to the different monitor and light effect the actual color of the item might be slightly different from the color showed on the pictures Thank you 2 Please allow slight measuring deviation due to manual measurement Detail Pictures