60A/80A/100A 12V-48V MPPT Solar Charge Controller PV Charger Controller 100A

Feature： 1. Advanced MPPT maxpowerpoint tracking technology tracking efficiency exceeds 99.5%. 2. LCD screen design to dynamically display the operating data and operating status of the equipment. 3. Compatible with Seal GEL Flood LifePO4 battery charging 4. Dual USB 5V charging port 5. 12V/24V/36V/48V automatic identification 6. Overvoltage protection 7. Overcurrent protection 8.Temperature protection 9. 7 working modes to choose from [7 working modes to choose from] 1. Charging method: Do not discharge under any circumstances. 2. Lighting control mode: When the controller detects nighttime there will be a 10-minute delay to start discharging. When daylight is detected there is a 10-minute delay and discharge stops. 3. Lighting and delay control mode: When the controller detects night there will be a 10-minute delay and the discharge begins to count down. When the timer stops at 0 discharge stops. The longest delay is 23:59. 4. control method: always maintain discharge without failure. 5. Manual control mode: whether to use ▼ to discharge. 6. Timing control mode: timing opening and closing of discharge. 7. Test mode: Same as lighting and delay control mode only losing 10 minutes of delay. 8. The controller still discharges under low voltage protection. Touch ▼ lightly for 5 seconds to continue the discharge output. But the discharge can only be stopped by hand. Be careful this performance may damage the battery! Specifications: *Product Name:Solar controller *Material:plastic *Color:blue *Size:20*20*7cm Battery voltage: 12V/24V/36V/48V automatic Charging current: *Current: 60A 80A 100A Package Contents: 1 * Solar controller 1 * Instructions Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.