6-35V Step Down Buck Module Full Protocol Mobile Phone Fast Charging Board QC4.0 3.0 For Huawei SCPFCP Apple PD VOOC One

Application:1. Electronic enthusiasts, mobile phone maintenance personnel, electronic industry personnel DIY fully compatible mobile phone flash charging module. 2. Outdoor occasions, long-term power outages, etc., use battery, solar panels and other DC power supply to flash all brands of mobile phones.Feature:Suitable for Qualcomm QC4+/QC4.0/QC3.0, Huawei SCP/FCP, OPPO VOOC, Apple 2.4A, Samsung AFC, one plus DASH, VIVO 9V2A dual-engine flash charger, MediaTek PE2.0Reminder: Some similar fast-filling boards in the market use the IP6518 solution, which does not support QC4.0, VOOC, DASH, and is not a full-service fast charge. And IP6518 output current is limited, so Huaweis super-fast charge SCP compatibility is not good.High efficiency:1. With external MOS tube, the conversion loss is much lower than the built-in MOS of IP6518 scheme. 2. Double-wire and + iron-silicon-aluminum magnetic ring is used, which is more efficient than the chip inductor and low in heat at the same power.3. Input and output are double parallel low resistance electrolytic capacitors, with 6 1206 chip ceramic capacitors! Only for higher performance!Note:Use the C-to-C/Type-C male to male double-headed data cable to charge your mobile phone or laptop.For OPPO and oneplus mobile phone charging with USB port. The QC4+/QC4.0/PD3.0 protocol uses the Type-C port.When the power supply voltage is higher than 21 volts, the C port PD protocol supports up to 20V 3A output, and the module is small in size.When char