5Pcs DC12V 10A 1CH 433MHz Wireless Relay RF Remote Control Switch Receiver

Specification 1 Input Voltage DC10 14V2 Standby Current 5MA3 RF Frequency 433MHZ4 RF Working mode Super heterodyne receiver5 Receiver Sensitivity 90dBm6 Remote Control Distance 100 meter In open environment 7 Decoding Way MCU Software decoding8 Can store the number of remote control 509 Support remote control type Fixed code learning code10 Channel 1CH11 Multiple working modes Jog Non Latched inter lock Latched self lock Self Latched Delay off 12 Wiring Method Fixed wiring terminal13 Working Voltage DC12V14 Output Current 10A15 Rated load 10A 250VAC 10A 125VAC10A 30VDC 10A 28VDC16 Output Normally open Common Normally closed17 Dimension 3 5cm 3cm 1 6cmWorking output way 1 Jog Non Latched Press one button is Working ON Loosen your finger on the same button is Stop OFF One channel switch need one buttons remote control 2 Self lock Self Latched Press one button for one time is working ON Press the same button again is stop OFF One channel switch need one buttons remote control 3 Inter lock Latched Press one button is working ON press another button is stop OFF One channel switch need 2 buttons remote control 4 Delay Press remote control relay pull in release the remote control and begin timekeeping after 5s 10s 15s will automatically close the relayDescription 1 Jog Press the learning button then release set the mode from the system automatically working mode to action mode wait for a while when the board LED off said it is into the learning