5MP OV5647 Camera Module 72° Focal Adjustable Length Night Vision NoIR Camera Board with Automatic IR-CUT

Introduction The Raspberry Pi IR CUT Camera is the day and night camera You can get the best imaging whatever it is in the daytime or at night It s a built in IR CUT camera can be used during the day and night When the camera at daytime will switch to day mode the camera image is a normal color image when the camera at night will switch to night mode the camera can normally identify the infrared fill light of the light which can be set through the software switch to solve the other night vision camera during the day to take pictures of the image color is not normal The differece of automatic or non automatic switch camera 1 The automatic switch camera will automatically turn to day mode non night vision at daytime or the light enough environment and it will turn to night vision mode at dark environment 2 The non automatic switch camera is the day mode acquiescently You can switch to night vision mode by this way Editing the config txt file 1 Executive command sudo nano boot config txt 2 Add disable camera led 1 3 Press Ctrl O on the keyboard and press Enter to save this configuration then press Ctrl X to exist 4 Restart the raspberry pi and it will turn to day mode 5 Remove the sudo nano boot config txt and save configuration as the 3 restart the raspberry pi it will be back to day modeSpecification 1 5 megapixel OV5647 sensor2 CCD size 1 4inch3 Aperture F 1 84 Focal Length 3 6mm adjustable5 Field of View