4inch RPi Touch Screen TFT LCD (A)480x320 Hardware Resolution forRaspberry Pi

Package Included 4inch RPi LCD A x 1Features 480x320 hardware resolutionResistive touch controlSupports any revision of Raspberry Pi directly pluggable Drivers provided works with your own Raspbian Ubuntu Kali Supports FBCP software driver as well allows to config software resolution and set up dual displayCombined with the Raspberry Pi allows you to Take photos by touching up to 17 camera modes Use software keyboard system interaction without keyboard mouse ParametersLCD TYPETFTLCD INTERFACESPITOUCH SCREEN TYPEResistiveTOUCH SCREEN CONTROLLERXPT2046COLORS65536BACKLIGHTLEDRESOLUTION320 480 Pixel ASPECT RATIO8 05POWER CONSUMPTIONTBDBACKLIGHT CURRENTTBDOPERATING TEMP ℃ TBD FAQ Why the LCD doesn t work with my Raspbian To use the LCD with the Raspberry Pi official image driver SPI touch interface only should be installed first Please refer to the user manual However for the first testing you may want to use our image directly if provided Why the LCD still doesn t work with the Waveshare provided image Make sure the hardware connection is correct and connects fine Make sure the image in TF card is burnt correctly The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully if both of the two LEDs keep on it is possible that the image was burnt incorrectly OR the TF card was in bad contact Which power supply should I use It is recommended to use a 5V 3A power adapter for the Raspberry Pi other than USB connection otherwise t